Manny's Tree ServiceManny's Tree ServiceTulsa, Oklahoma
ServicesTree RemovalTree TrimmingPruning & ToppingStump GrindingEmergency Storm DamageFence Line & Vine ClearingConcrete RemovalJunk RemovalService AreasTulsaEast TulsaBroken ArrowCowetaOwassoSand SpringsCollinsvilleSkiatookBartlesvilleJenksGlenpoolMuskogeeMoreReviewsGuidesAboutContactCall (918) 296-4184

What does stump grinding actually involve?

Stump grinding uses a rotating cutting wheel to chew a stump down below grade, turning the wood into chips rather than pulling the root plate out of the ground. You end up with a shallow depression full of wood chips, no crater, and no root ball to dispose of. Manny's Tree Service quotes stump grinding on site rather than over the phone, because the price depends on things nobody can describe accurately by voice — diameter, how high the stump was left, what is buried near it, and whether a machine can physically reach it.

Grinding versus pulling — what is the difference?

Pulling a stump means excavating it: digging around the root plate and lifting the whole thing out with a machine. It leaves a hole the size of the root system, which then has to be backfilled, and it leaves a stump that has to go somewhere.

Grinding stays above that. The wheel passes back and forth across the stump, taking a few inches at a time, and the operator works down several inches below the surrounding soil level. The roots that radiate out from the stump mostly stay in the ground and rot in place over the following years.

For most homeowners, grinding is the right call. It is less disruptive to the surrounding lawn, it does not require the access an excavator needs, and it does not generate a stump to haul off. Pulling makes sense when something is going in the same spot that needs clean soil — a footing, a post, a pool.

What does the finished job actually look like?

This is where expectations go wrong, so it is worth being specific:

  • A chip pile, not bare dirt. Grinding produces a surprising volume of chips — considerably more than the stump looked like it contained, because the wood is shredded and fluffed up. You can leave them in place, spread them as mulch, or have them hauled away.
  • A depression, not a hole. Once the chips settle you will usually have a soft dip where the stump was.
  • Surface roots may still be there. Grinding the stump does not remove the roots running out under the lawn. Major surface roots can be ground too, but that is additional work and should be discussed up front, not assumed.
  • It is not ready to plant the same day. A pile of fresh wood chips is not soil. If you want grass or a new tree in that spot, the chips come out and topsoil goes in.

Say what you actually want the spot to become before the work starts. "Grind the stump" and "I want to put sod there next month" are two different scopes.

What drives the price?

There is no honest flat rate for stump grinding, and anyone giving you one over the phone is either padding it or about to revise it on arrival. What the crew is looking at:

  • Diameter at the ground, not at chest height. A trunk that measures twenty inches up top can flare to thirty-plus where it meets the soil, and the flare is what gets ground.
  • Stump height. A stump cut flush is faster than one left two feet tall. If a removal and a grind are being quoted together, cutting low is part of the plan.
  • Species and wood condition. Post oak is hard work. A punky, half-rotted silver maple grinds fast. Eastern redcedar is stringy and tends to load the wheel.
  • Access. A grinder has to get to the stump. A back yard with a narrow gate, a slope, or a retaining wall between the machine and the stump changes the job entirely, and sometimes changes the machine.
  • What is near or under it. Irrigation lines, low-voltage lighting, a sprinkler valve box, a sewer cleanout, utility runs. Grinding blind near buried lines is how a cheap job becomes an expensive one, so call 811 and have the lines marked before work is scheduled.
  • Number of stumps. Several in one visit costs less per stump than the same stumps across three visits, because mobilising the machine is a fixed chunk of the work.
  • Chip disposal. Leaving the chips is cheapest. Hauling them off is a separate line.

Stump grinding is quoted on site like the rest of the work, because diameter, how many stumps, and whether the grinder can physically reach them drive the number, and none of that reads over the phone. It is priced after someone has looked at the stump.

Why so many Tulsa-area stumps are still sitting there

The December 2007 and October 2020 ice storms took down an enormous number of limbs and whole trees across the Tulsa area, and in a lot of yards the wood got cleared and the stump simply stayed. Five or ten years later those stumps are still there, often half-hidden in a bed, still sprouting in the case of hackberry and elm, and still in the way of whatever the homeowner wants to do with the yard.

Around Glenpool, where lots tend to be generous and a lot of the housing stock went in during build waves that landscaped heavily with fast-growing shade trees, a single yard can have three or four of these. That is the scenario where doing them all in one visit is meaningfully cheaper than doing them one at a time.

Grinding as part of a removal, or on its own?

If a tree is coming down anyway, decide about the stump before the crew leaves. The stump is cheapest to grind when the machine is already there and the stump has been cut flush on purpose, and most expensive when someone comes back six months later to a two-foot stump in a re-landscaped bed.

A stump grinding visit on its own is perfectly normal too — plenty of calls are for stumps somebody else left years ago. Either way the estimate is free and done on site, and the crew is bilingual in English and Spanish, so the conversation about what you want the spot to look like afterwards can happen in whichever language is easier.

Questions to ask whoever you hire

  • Will you grind below grade, and how far?
  • Are surface roots included or extra?
  • Who is calling 811, and when?
  • Is the stump being cut flush first?

Five questions, and they remove almost every disagreement that happens after a grinding job. Manny's Tree Service answers all five in the estimate rather than leaving them to the day of the work.

Need this done rather than read about? Manny's Tree Service quotes it free and on site across the Tulsa metro, Mon–Sat, 8am–6pm, plus emergency calls any hour. Call (918) 296-4184
FAQ

Related questions

How much does stump grinding cost?

Manny's Tree Service quotes stump grinding on site, because the price turns on stump diameter at the ground, stump height, access for the machine, and what is buried nearby. Manny's Tree Service does not quote stump grinding over the phone, and the estimate is free and written while the crew is at the property.

Does grinding remove the roots too?

No — Manny's Tree Service grinds the stump down below grade and the radiating roots are left in the ground to decay over time. Major surface roots can be ground as additional work, so Manny's Tree Service recommends raising that during the estimate rather than assuming it is included.

Can I plant grass or a new tree where the stump was?

Not immediately, because Manny's Tree Service leaves a depression filled with fresh wood chips and chips are not soil. Tell Manny's Tree Service what the spot is becoming and the chips can be hauled off so topsoil can go in.

Is it cheaper to grind several stumps at once?

Yes, per stump — Manny's Tree Service only has to bring and set up the machine once, so several stumps in one visit cost less each than the same stumps spread across separate trips. Manny's Tree Service will price the whole set in one estimate.

That tree isn't getting smaller

Free estimate, firm price, yard left clean. Call Manny's Tree Service and get it off the list.

Call NowFree Estimate